Innovation
New structures developed in-house
For thinner, simpler and more recyclable packs.
New · Innovation
FP1039AF
One MAP lidding film that seals to both PP and PE trays
- A single lidding film for PP and PE trays: fewer SKUs and fewer changeovers
- High-barrier sealant layer for MAP shelf-life
- Reverse-printed under BOPET: print is protected from scuffing
- Fresh meat, processed meat, sliced cheese
- PE + PP
- Two tray types, one film
- 30 · 40 · 50 µm
- HB39AF standard thicknesses
- BOPET 12 µmOuter film · print carrier
- Reverse print
- Lamination
Schematic; layer thicknesses are not to scale.
New · Innovation
HBQ258S
Retortable thermoformable bottom film: recyclable mono-PP pack
- Transparent and boilable
- Runs on all standard thermoform packaging machines
- Produced on our water-quench (Aquarex) line for clarity and uniform forming
- 124.5 °C
- Retort (product core), 30 min test*
- 5–8 cm
- Deep draw
- 150 · 170 · 200 µm
- Standard thicknesses
- Mono-PP
- Recyclable with BOPP top web
* Retort time depends on product volume.
Product page
- PPHeat seal · moisture barrier
- PPHeat seal · moisture barrier
Schematic; layer thicknesses are not to scale.
New · Innovation
PE10TL · HB30TL
Thermal lamination films for PET sheet: no adhesive needed
- The film is bonded to the PET sheet by heat while the sheet is still hot on the extrusion line
- No adhesive and no separate lamination step
- PE10TL gives a PE-sealable surface; HB30TL adds an EVOH oxygen barrier
- 40 / 50 µm
- Film thickness
- ≤ 2,000 mm
- Film width
- 300–500 µm
- PET sheet
- PE10TL (PE)Heat seal · moisture barrier
- Heat-bonded on the PET lineLamination
- PET sheet 300–500 µmOuter film · print carrier
Schematic; layer thicknesses are not to scale.
New · Innovation
Aquarex films
Water-quench thermoform films in jumbo rolls for converters and distributors
- Fitpak produces: 9-layer water-quench coextrusion on W&H Aquarex lines
- Jumbo roll delivery: mill rolls shipped to your warehouse
- You slit & sell: local slitting to the exact web width of each packer
- 950–1,300 mm
- Width per extrusion web
- PAStrength · puncture resistance
- PEHeat seal · moisture barrier
Schematic; layer thicknesses are not to scale.
New · Innovation
Sachets & portion packs
Same protection, less material
- High-barrier film replaces the aluminium layer
- Easy tearing, clean cutting, excellent machine performance
- For ketchup, mayonnaise and sauces
- 97 → 53 g/m²
- Packaging weight (indicative, catalogue comparison)
- Metallised BOPETOuter film · print carrier
Schematic; layer thicknesses are not to scale.
Tell us about your product. We'll engineer its film.
Tell us about your product, tray type and machine; our technical team will recommend the structure that fits.